Reading
How to melt gold agglomerates basic gold powder:
1. Slowly pour the gold powder into a crucible.
The crucible should be a cone to protect some gold lump spilling while melting a lump.
2. Melting gold powder agglomerates.
3. Fill little Borax for beautiful and shine. Then scoop gold out.
4. Scoop gold out from the crucible when it coagulated. Suddenly fill in distilled water. Because if gold lost heat, gold will adhere to the crucible.
5. If you use an electric crucible or ceramic crucible when gold was melted pour it into the block.
6. You can use a printing block.
7. A high percentage of gold is round and glossy. This purity of gold is 99.8 %. If you want gold cleaner, you can boil it with nitric acid for about10 -20 minutes.
gold agglomerates
The crucible should be a cone to protect some gold lump spilling while melting a lump.
2. Melting gold powder agglomerates.
3. Fill little Borax for beautiful and shine. Then scoop gold out.
4. Scoop gold out from the crucible when it coagulated. Suddenly fill in distilled water. Because if gold lost heat, gold will adhere to the crucible.
5. If you use an electric crucible or ceramic crucible when gold was melted pour it into the block.
6. You can use a printing block.
7. A high percentage of gold is round and glossy. This purity of gold is 99.8 %. If you want gold cleaner, you can boil it with nitric acid for about10 -20 minutes.
